SERVICES

Our in-house Gunsmith has over seven years’ experience working for large scale manufacturers to smaller scale shops, giving him the knowledge to diagnose and fix most anything wrong with your firearm.

 

STANDARD SERVICE RATES

All hourly rates are billed in 15 minute increments.

TRANSFER – $25 per firearm.

-Only Massachusetts compliant firearms.

-Person to Person.

-To and from other FFLs.

CONSULTATION – $50 per hr.

Sit down with our dedicated and knowledgeable staff to come up with the best solution to fit your needs.

*Fee is waived if project is commissioned.

JOB RATE – $65 per hr.

This is a standard rate applied to custom jobs not specified elsewhere.

STANDARD PARTS PROCUREMENT FEE (SPPF) – Cost + 20%.

If we provide the parts for your build, we will charge the cost of the part plus an additional 20%.

NON-STANDARD PARTS PROCUREMENT FEE (NSPPF) – Cost + 20% + $40 per hr.

If we provide the hard to find parts for your build, we will charge the cost of the part plus 20% plus $40 per hour.

ASSEMBLY AND DISASSEMBLY – $40 per hr.

This rate applies to all firearms that are disassembled and not worked on, at a $10 minimum charge, billed in 15 minute increments, unless stated otherwise.

HAND CLEANING – $70 per firearm

-Complete disassembly of firearm.

-Each part is hand cleaned and inspected.

*Standard parts procurement fee applies for replaced parts.

-Firearm is reassembled.

-Lubricated using XF-7 product.

ULTRA CLEANING – $80 per firearm.

-Combination of Standard Cleaning and Hand Cleaning.

BORE SIGHTING – $15 per firearm.

TEST FIRING – $10 per firearm + Ammo.

-Visual inspection of operation of firearm.

*SPPF applies to ammunition not supplied by customer.

SPENT CASING REMOVAL – $30 per firearm.

 

LIVE ROUND REMOVAL – $60 per cartridge.

BORE OBSTRUCTION REMOVAL – $65 per hr.

 

PISTOL SERVICE RATES

Includes all makes and models (All parts are visually inspected upon disassembly)

 

SIGHT ALIGNMENT – $15 PER FIREARM.

-Laser bore-sighting to our standard specifications unless stated otherwise by customer.

-Adjustment of dovetail sights.

DOVETAIL SIGHTS CHANGE – $30 PER FIREARM.

-Removal of old sights.

-Installation of new sights.

*SPPF applies to all parts provided by Mass Armament.

-Bore sighting to our standard specifications unless stated otherwise by customer.

TRIGGER WORK ON Semi-AUTOS – $65 PER FIREARM.

 

 

TRIGGER WORK ON REVOLVERS – $70 per firearm

-Some revolvers we do not work on. Ask us about yours

 

DROP IN TRIGGER KIT INSTALLATION

$40 per firearm

-Factory components swapped out with aftermarket parts

 

AR-10 & AR-15

SERVICES & RATES

Includes all makes and models (All parts are visually inspected upon disassembly)

 

BAYONET LUG REMOVAL – $20 per firearm

-Removal of bayonet lug

-Refinishing of area

PINNED MUZZLE DEVICE REMOVAL – $35 per firearm

The device is to be considered non-salvageable.

PINNING OF MUZZLE DEVICE – $45 per firearm

Muzzle device is pinned to barrel

*SPPF applies to all parts supplied by Mass Armament

BARREL INSTALLATION – $75 per firearm

-Removal of old barrel (if applicable)

-Installation of new barrel

*SPPF applies to all barrels and barrel nuts supplied by Mass Armament

-Compliance work is an additional $45 (if applicable)

PINNING OF STOCK – $25 per firearm

Stock is set to customer preferred length and includes all harware.

STOCK INSTALLATION – $35 per firearm

-Removal of old stock (if applicable)

-Installation of new stock

*SPPF applies to all stocks supplied by Mass Armament

-Compliance work is an additional $25 (if applicable)

HAND GUARD INSTALLATION – $55 per firearm

-Removal of old hand guard and barrel nut (if applicable)

-Installation of new hand guard and barrel nut

*SPPF applies to hand guard and barrel nut supplied by Mass Armament 

LOWER RECEIVER ASSEMBLY – $55 per firearm

-Assembly

-Mating of components

*SPPF applies to all parts supplied by Mass Armament

-Function testing

UPPER RECEIVER ASSEMBLY – $70 per firearm

-Assembly

-Mating of components

*SPPF applies to all parts supplied by Mass Armament

-Function testing

COMPLETE TUNE UP – $75 per firearm

-Firearm diagnostics check

-Disassembly

-Replacement of worn springs

*SPPF applies to all parts provided by Mass Armament

*Cleaning rates apply based upon customer preference

-Reassembly regardless if clean

FULL MA COMPLIANCE WORK – $80 per firearm

-Pinning of muzzle device

-Removal of bayonet lug

-Pinning of Stock

*SPPF applies to all parts supplied by Mass Armament

COMPLETE RIFLE ASSEMBLY – $125 per firearm

-Assembly

-Mating of components

*SPPF applies to all parts supplied by Mass Armament

-Function testing

*Compliance work rates apply

 

ADDITIONAL RIFLE SERVICES

Includes all makes and models (All parts are visually inspected upon disassembly)

MOUNT & BORE-SIGHT SCOPE – $25 per firearm

-Mounting of optic

*Machining rates apply when no mounting point is available

-Bore sighting of optic to our standard specification unless stated otherwise by customer

*SPPF applies to all parts supplied by Mass Armament

RECOIL PAD INSTALLATION – $65 per firearm

-Removal of old recoil pad

-Installation of new recoil pad

-Adjusted to customer specifications

*SPPF applies to all parts supplied by Mass Armament

 

SHOTGUN SERVICES

Includes most makes and models (All parts are visually inspected upon disassembly)

 

TRIGGER WORK – $65 per firearm

-Polishing and honing of mating surfaces for a smooth pull and a crisp break

RECOIL PAD INSTALLATION – $65 per firearm

-Removal of old recoil pad

-Installation of new recoil pad

-Adjusted to customer specifications

*SPPF applies to all parts supplied by Mass Armament

*PRICES MAY VARY AT OUR DISCRETION FOR JOB SEVERITY*

MASS ARMAMENT

FRIENDLY,

KNOWLEDGEABLe

& PRECISE

Hours

Monday: 10am – 6pm

Tuesday: 10am – 6pm

Wednesday: 10am – 6pm

Thursday: 10am – 6pm

Friday: 10am – 6pm

Saturday: 10am – 3pm

Sunday: Closed

address

95 Mechanic Street Unit 1

Bellingham, MA 02019

(774) 708-0087